Top: The front and back edges are triple bent to enhance strength and rigidity. Material - thickness 0.9mm C.R.S.S

Side: The sides L/R have 2 side brace welded to hold the upright. Material - thickness 0.9mm C.R.S.S

Upright: Two channels are welded together and welded to a 2" x 3" RHS which acts as leg base. Slots of 25mm intervals are punched on the upright for easy adjustability. Material - thickness 1.5mm C.R.S.S

Bottom Brace: 1" x 2" RHS Bar with both ends welded with 3mm plate with holes which will be riveted to the upright.

Shelf & Shelf End: Shelf is bent on all four sides and is riveted to the shelf end. Shelf can withstand a load of 70kgs. Shelf Depth - 228mm. Material - thickness 1.2mm C.R.S.S

Book Support: The book support is made from diameter 5mm wire which can slide underneath the shelf and can stop at any point to support the books.

Wire & Turn Buckle: Diameter 3mm high tension wire and 6" turn buckle is used to strengthen the rigidity of the library shelving diagonally.

Colour: Ral Grey or Beige powder coated.

Size: Per Single Sided Bay: 915W x 304D x 1981H (mm). Per Double Sided Bay: 915H x 540D x 1981H (mm).